Sale!

E-Flite Power 60 Brushless Outrunner Motor, 400Kv, 3.5mm Bullet

Original price was: $126.99.Current price is: $88.89.

SKU: EFLM4060A Categories: Motors, Parts & Electronics & Accessories Tag: E-flite

Get Quality, Get More
No-Questions-Asked Returns
Service that stands out, online and always timely.
fast shipping

Description
Reviews (0)

Key Features

Equivalent to a 60-size glow engine for 6 to 10 lb (2.7 to 4.5 kg) airplanes
Ideal for 46-size 3D airplanes up to 7 lb (3.2 kg)
Ideal for models requiring up to 1200 watts of power
High-torque, direct-drive alternative to inrunner brushless motors
Includes mount, prop adapters and mounting hardware
External rotor design—6mm shaft can easily be reversed for alternative motor installations
Slotted 14-pole outrunner design
High-quality construction with ball bearings and hardened steel shaft
NOTE: Not recommended to use with E-flite 80-Amp Pro Switch-Mode ESC (EFLA1080B)
Quiet, lightweight operation

Needed To Complete

80A brushless ESC
5S–7S Li-Po or 16- to 24-cell Ni-MH/Ni-Cd
14×8 to 16×10 prop

Overview

The Power 60 is designed to deliver clean and quiet power for 60-size sport and scale airplanes weighing 6 to 10 pounds (2.7–4.5 kg), 46-size 3D airplanes up to 7 pounds (3.2 kg), or models requiring up to 1200 watts of power. It’s an especially good match for Hangar 9 .60-size warbirds like the Corsair 60 (HAN2575), P-47D Thunderbolt 60 (HAN2975), P-40 Warhawk 60 (HAN2850), P-51 Mustang 60 (HAN2375), P-51 Miss America 60 (HAN2775) and .46-size 3D planes such as the Hangar 9 Funtana 40 (HAN1975) or Seagull Harrier 46 (SEA3025).

Examples of Airplane Setups:

NOTE: All data measured at full throttle. Actual performance may vary depending on battery and flight conditions.

Hangar 9 P-51 Miss America (HAN2775)

Motor: Power 60

ESC: Castle Creations Phoenix 80 (Standard settings with 18V Soft Li-Po cutoff and no brake)

APC 15x10E

Battery: Thunder Power PRO LITE 6000mAh 6S3P (THP60003S3PPL x2 in series)

Flying Weight w/Battery: 8.8 lb

Amps	Volts	Watts	Input Watts/Pound	RPM
56.0	21.3	1195	136	7375

Expect very strong performance with a great balance of thrust and top speed. Average duration is approximately 8 to 15 minutes depending on throttle management.

Seagull Harrier 3D 46 (SEA3025)

Motor: Power 60

ESC: Castle Creations Phoenix 80 (Standard settings with 18V Soft Li-Po cutoff and no brake)

Prop: APC 16x8E

Battery: Thunder Power PRO LITE 4200mAh 6S2P (THP42003S2PPL x2 in series)

Flying Weight w/Battery: 6.4 lb

Amps	Volts	Watts	Input Watts/Pound	RPM
50.5	21.0	1060	165	6975

Expect very strong performance with unlimited vertical and plentiful power for hovering and 3D aerobatics. Average duration is approximately 8 to 15 minutes depending on throttle management.

Equivalent to a 60-size glow engine for 6 to 10 lb (2.7 to 4.5 kg) airplanes
Ideal for 46-size 3D airplanes up to 7 lb (3.2 kg)
Ideal for models requiring up to 1200 watts of power
High-torque, direct-drive alternative to inrunner brushless motors
Includes mount, prop adapters and mounting hardware
External rotor design—6mm shaft can easily be reversed for alternative motor installations
Slotted 14-pole outrunner design
High-quality construction with ball bearings and hardened steel shaft
NOTE: Not recommended to use with E-flite 80-Amp Pro Switch-Mode ESC (EFLA1080B)
Quiet, lightweight operation

Product Specifications

Motor Type	Brushless
Adjustable Timing	No
Voltage	18.5 to 28.8
Motor Design	Outrunner
Recommended Prop Range	14×8 to 16×10
Shaft Diameter	6mm (.24 in)
Outer Diameter	2 in (50mm)
Connector Type	3.5mm Bullet
Wire Gauge	14 AWG
Bushing Or Bearing	Bearing
Idle Current (Io)	2.70A @ 10V
RPM/Volt (Kv)	400